I have a Sonicview 360 Premier Dongle and I have done all of the following steps:

1.Connected my receiver to tv.

2.Loaded this file first 245 for Premier posted on July 11 via USB,
let receiver reboot then turn OFF receiver.

Sonicview 360 Premier
Link>>> Sonicview 360 Premier Dongle [ihub] FTA Fix July.11.2009

3.Connected Dongle/Ihub, internet and satellite dish cable to receiver.

4.Powered up receiver.

5.Setup user settings after loading latest file for receiver.
-----Setup dish settings and scan satellites and save settings.
-----Set your local time.

6.Download and run Wiznet Tool and extract 1.9 from zip folder to my computer.

Link>>> SonicView iHub - iHub v1.9 File & WIZnet loader

7.Run Wiznet Tool.
-----Click search tab.
-----see 1.9. I see IP's listed in the Wiznet Tool fields.
-----extracted 1.9 file and click open.Wait until downloading complete and close all windows with Wiznet Tool.
-----Re open Wiznet Tool and click search.
-----I see 1.9 in the version box as seen below.


8.Download latest file for MY receiver.

-----Sonicview 360 Premier.
Link>>> Sonicview 360 Premier Dongle FTA Fix Dec.26.2009


9. Download file into receiver and rebooted when completed.

10.went into receiver menu and to ipconfig
-----Enter Ihub serial number located on top of Ihub
-----Apply and click OK
-----Rebooted after this to make sure ipconfig had been successfully applied.
-----After reboot saw a message saying " Network Adapter Connect "

11 .Reboot after this to make sure all changed had been successfully applied.
-----Have receiver on ch 200 and was patient,
----- waited 2 hours and all I get is "no service or scambled"


What sm I doing wrong. I do get channel 101 only.

please help