Click on the link below for a close setup.I have a motorized dish but I have not had much time with it but I will so I can rid myself of my other dishes.
The basic setup is


Find a sat 82,91,110 or 119.If you are going to use these sats.Set 91 or 110 as center point of the dish swing left and right.

After you have a sat.
Set your east and west limits.Move the dish a little beyond 82 and 119 each way in the swing.Once you went pasted the sat either east or west store that limit then move the dish to the opposite,pasted east or west sat and store.

Move the dish back to the sat 91 or 110 and adjust the skew then move the dish a little left and right and try to hit both sats in the swing.Get the best s/q and then store sat position.

Hope this helps if not hopefully some of our silent partners will help.


Link>>> How to setup Diseqc 1.2 Motor (Digiwave HH990 and SG2100)

__________________