The new IKS Fix File.

If you don't have the picture after 5min, reboot your system using the switch at the back of the receiver and make sure that you are connected to the IKS server.

• Click here for the troubleshooting guide.
• Click here for the how to unzip files instructions.
• Click here for the IKS explanation.

* Change*
( Main software upgrade )

Note:

- Always use Remove Device Safely function in USB Menu before remove USB drive (thumb drive/USB HDD).

- Always format USB thumb drive before any update.

- Do not extract file direct on to the UBS thumb drive, extract to a folder then copy to USB thumb drive.

- Do a hard reboot (power OFF-ON using rear switch) after every update.

Attention: before loading or defaulting the cnx box, save your channel data on the USB memory stick. Simply insert the stick into the CNX and go to the USB menu and hit the green button. It will save as STB data .SDB
After files are loaded then load your data file.
Some are experiencing trouble scanning the sats after these files are loaded. With that data file, there is no need to scan.



this latest upgrade file will work with latest factory file.so please upgrade to new factory file then load new upgrade file then load new dongle file for better result.

improvement:
-fixed some bug issue
-INFO bar shows ON service or OFF service
(ON service=connected and OFF service=disconnected)
-freezing issue



[

Attached Files

	DTP_5.16_Factory.zip (958.5 KB, 64 views)
	DTP_2.52.zip (1.06 MB, 85 views)
	CNX Duo-Trio Dongle Fta Fix Feb.10.2010.zip (25.3 KB, 63 views)

__________________