R-Linkpower Config Tool

This will let you assign a static IP to your R-link

1. Download and place it a new folder.

2. Hook up R-Link R-10 as you did for initial load (R-Link Black/Blue Cable to Computer) Note- do not have internet cable hooked up

3. Open Dongle Config Tool

4. Select Com port

5. Uncheck DHCP Box - this will allow you to change/insert numbers in sections below it

6. Fill in Gateway, Subnet and Local IP numbers in correct sections

7. Click on "write config" - this will write your settings to R-Link

8. You can power down and hook to router, light should turn green quickly

Sample Settings for Linksys router:

Gateway- 192.168.1.1

Subnet - 255.255.255.0

Local IP- 192.168.1.XXX

XXX on Linksys can be replaced with numbers 100-149 on most Linksys routers. Using 131,132,133,134,135,,136 is usually available and good to go.

Attached Images

RLinkpowerConfig.jpg (15.4 KB, 248 views)

Attached Files

R-linkpower Config Tool.zip (389.5 KB, 74 views)

__________________


Please don't PM me with fta related questions, they will no longer be answered.