Download and extract R-10 Loader to a new folder
The cable used between computer and R-link is Straight cable(black and blue color). Power supply plugged in and power on(Automatic On)

LOADER FOLDER

(above)
This is what it will look like in the folder, the "Configuration Settings " file will not be there till after you load the R-link

LOADER

This is what the loader looks like when you open it,select your Serial Port(Com Port) by typing the number of Serial Port in box on left. Click "Open" and then next clixk on "Patch Run"

LOADER WORKING

If above steps are followed correctly, you will see the blue progress bar filling up the slot and "patch processing and percentage ".

If settings are incorrect (Serial Port or wrong cable/bad connection) you will see "patch Failed" where "patch processing and percentage ").
Reset from first step and try again. Most errors have happened because of wrong Serial Port setting.

COMPLETE

This is what it looks like when its complete. You can click on "ok' and power off Its time to hook to the receiver.
When hooking to your Coolsat 5000 and 6000 Units you will use the cross-over cable (all Black in color) between R-Link and unit.
Hook up Ethernet cable and Plug in power supply.Red light between power plug and Ethernet will turn green when connect to server. Turn on Receiver and watch tv. (you should have proper R-Link receiver Files loaded already

__________________