All ch. are scrable now . Any fix please let us know. Thank's.

Are you using latest fix and do you have R-Link dongle installed, if so try hard boot if it doesn't help check your settings. Try this as well


If it is a 22khz SW then turn 22kz OFF for 119 but leave ON for 110W off

If you are using a Diswqc Sw 4X1 then you are missing the Diseqc Settings, turn them on and Use Port 1 for 119W and Port 2 for 110W. Turn the 22Khz Sw Off for both

Make certain you have the correct Sat Signal Locked in (Displayed at the top right side of the Screen)

Now Auto Scan

See if CH 100 and 213 are in now, if not, read on.

If you are using DP LNBs, then please try LNB Type: OSC-DP (I think it is) if you have Q signal then Auto Scan and try Ch 100. again

__________________


Please don't PM me with fta related questions, they will no longer be answered.

back on air again. thanks

Good stuff

__________________


Please don't PM me with fta related questions, they will no longer be answered.

Which file is the newest for the r-link r-10
for coolsat

I am assuming you have the cs6000.Click the link below for the latest fix.



r-linkCoolsat 6000 Dongle Fix Dec.11.2009

__________________

hi
done factory reat 2 times an loaded dece file designed to work
with the r-ling noting working this a new r-ling i have the r-ling
connect to the computer with a ethernet cable the to littil lights
were the cable plugs in are flashing but the red light between
the power and ethernet jacks is not turn green when connect
to the server

Try resetting you router and see if green light comes in.

__________________


Please don't PM me with fta related questions, they will no longer be answered.