I have a sv 360 elite and I have a super dish with 3 lnb on it they are ariza lnb and they are positioned for 110 ,119, and 91 degrees, mu question is what setting should I set the connection at single,dpp, or loop through and what should the lnb's be set at my choices are single,ocs,ocspp,legacy twin a&b and legacy quad a&b and universal I have my dish 500 running just wanted to try and get this going also thanlks for the help Angel45

dont know much about the ariza, but if you just switch around on ur settings such as single, ocs,ocsdp,legacy.....

any way if you just switch around ur settings you will see if sat comes in up in right hand corner it will say locked sat 110 or 119 or 91 depending on ur ports you have setup...

i would say the settings should be the same as ur d!sh 500 such as sat 110 setting 12224 and sat 119 setting 12239

__________________

thanks putski I will play around with it and hope it works thanks again Angel45


Angel45 please post ur settings after you get it fugured out...Thank you!

yes you should get it to work!

and ur welcome and good luck!!!

__________________

[quote=angel45;18908]thanks putski I will play around with it and hope it works thanks again Angel45


Angel45 please post ur settings after you get it fugured out...Thank you!

__________________

Hi putski I haven't got the dish setup as to locate a signal and it is pointed i n same direction as my dish 500 and they are only 5 ft, apart, i am still working on weather permitting and as soon as I get it working I will post settings. Is there any way to see if the sv 4x1 Diseqc switch is bad? I just took it out of the box but that doesn't mean anything I know, Well good luck fishing as I know how you like it on the ice I am your neighbor over in michigan near saginaw bay Angel 45

It would be very unlikely to have a brand new switch that didn't work. When looking for signal don't use switch, hook up your receiver directly to each LNB and once you have signal on all birds connect discq switch, make sure your receiver is OFF when connecting switch.

__________________