Back in the day when I was SUPERMAN of the BUD's systems. The lower LNB K signal was, the better the picture.
NOW the question of the day is what is the best of the best LNB for the sv elite system?
The run from the dish to the reciever is about 75 maybe 85 feet. So what do you think?
Bizz

the same still goes.the lower the db's the better. look for the best lnb weather it be single ,duo or quad to have the quiet the better .with fta signals you need linear and circular for charlie.low frequency of 11250 mhz for circular and a mix for linear. you all will need to match the signal and the less rf leakage the better also.transmission feed should match the load feed.>>> Here is a list of satellites and the correct lnb's to use with them:

61.5W Echo 3 - use standard circular lnb - 11250 MHz
63W Estrela - use linear lnb, either universal or standard linear- 10750 MHz
71.8W Nahuel 1- linear lnb, either universal or standard linear- 10750 MHz
77W Echo 4 - circular standard lnb - 11250 MHz
79W Amc 5 - linear lnb, either universal or standard - 10750 MHz
82W Nimiq 2 - circular standard lnb= 11250 MHz
87W Amc 3 - --- linear lnb, either universal or standard - 10750 MHz
91W Galaxy 11- linear lnb, either universal or standard- 10750 MHz
91W Nimiq1&3- circular lnb standard= 11250 MHz
93W Intelsat 6- linear lnb, either universal or standard-10750 MHz
95W Galaxy 3c- linear lnb, either universal or standard - 10750 MHz
97W Intelsat5- linear lnb, either universal or standard - 10750 MHz
101W Amc 4 - linear lnb, either universal or standard- 10750 MHz
103W Amc 1- linear lnb, either universal or standard- 10750 MHz
105W Amc 15- linear lnb, either universal or standard- 10750 MHz
107.3W Anik - linear lnb, either universal or standard- 10750 MHz
110W Echo 8 & 10,X - circular lnb standard - 11250 MHz
111W Anik f2 - linear lnb, either universal or standard - 10750 MHz
116.8W Satmex5 - linear lnb, either universal or standard - 10750 MHz
119W Echo 7 - circular lnb standard - 11250 MHz
121W Echo 9 - linear lnb, either universal or standard - 10750 MHz
123W Galaxy 10r - linear lnb, either universal or standard - 10750 MHz
127W Galaxy 13 - linear lnb, either universal or standard - 10750 MHz
129W Echo 5 - circular lnb standard - 11250 MHz
148W Echo1 & 2 - circular lnb standard - 11250 MH

__________________

What should be the stantard setting for 118.8?

circular ,10750 mhz for 118.8. lower the better and if this helps the larger the better for the dish size.

__________________

I am aimed at 91,110 and 119 using a standard circular lnb standard - 11250 MHz LNB, I understand about the dish size which will be another tread in the dish section later. However where can I find a super Kryptonite LNB from? I am sure there is a few out there testing some great ones. I would like to know what people think.
Thanks