I need some professional help with setting up this system I have been trying for a couple months with no sucess. Need someone in thr tri city area of Micigan mbs area. I am willing to pay reasonable rates. I have adiseqc h-h motor model sg6000 for the 90 cm dish, my pole is level and plumb just need help Angel45

Click on the link below for a close setup.I have a motorized dish but I have not had much time with it but I will so I can rid myself of my other dishes.
The basic setup is


Find a sat 82,91,110 or 119.If you are going to use these sats.Set 91 or 110 as center point of the dish swing left and right.

After you have a sat.
Set your east and west limits.Move the dish a little beyond 82 and 119 each way in the swing.Once you went pasted the sat either east or west store that limit then move the dish to the opposite,pasted east or west sat and store.

Move the dish back to the sat 91 or 110 and adjust the skew then move the dish a little left and right and try to hit both sats in the swing.Get the best s/q and then store sat position.

Hope this helps if not hopefully some of our silent partners will help.


Link>>> How to setup Diseqc 1.2 Motor (Digiwave HH990 and SG2100)

__________________

• General Helpful Hints on Forum Posting

Hello angel45, I don't know much about this type of dish setup but I'm willing to do some research and see if we can help you get this damn dish and motor setup for you...

here is a link it tells you the settings for dish setup and motorized setup
Link>>> Satellite Finder / Dish Pointing Calculator with Google Maps | DishPointer.com

you just put in ur address then go down to where it says motorized dish then you can get some setting info.

good luck and I will be back after researching this subject some more for you!

__________________