KBOX K1 PLUS USB LOADING PROCEDURE
If at any time you are asked for a password, input 0000 unlesss you changed it.
1. Download the factory file and newest release to your pc. Its best to save it to your desktop so you can find it later. Once the file is downloaded to your pc, you can right click on it and select "Extract Here" or Extract All".
The file will then be extracted from the archive. Do this for all files you downloaded.
2. Now plug in your USB stick and transfer the extracted file to it. To do this you can either drag and drop the file into the open window of your USB stick, or you can right click on the extracted file and navigate to the " Send To" menu and pick the drive letter for your USB stick. You can find the drive letter of your USB stick by going to My Computer and looking under Removable Devices.
Note: File cant be placed in any folders on the USB stick
3. Now turn your stb on and plug the USB stick into it. If a file window doesn't open displaying the files on USB, Press Menu/Data Transfer/ and press OK. In the file window, navigate to the factory file and press OK to begin loading. Do Not interupt the loading process. Once the file is loaded, the stb will reboot on its own.
4. Once the reciver reboots, remove the USB stick and select your language. Then go to Menu/Configuration/System Recovery/Factory Set and then press OK and confirm the changes.
Repeat steps 3 and 4 to load any additional files.
Note: Make sure you do a Factory Reset after every file you load.
5. Now that you have loaded all the files you want, You will need to set your dish settings. To do this, press Menu/Installation/Dish Settings. Then highlight the Satellite heading and press OK. Select the satellite you want to configure and press OK. Now scroll down to LNB Type and use the right/left arrow buttons on the remote to and set according to the LNB you have .
6. Next navigate down to Diseqc Software 1.0 and use the right/left arrow button to select the port # that you have assigned on the diseqc switch, for the satellite you are setting up. Now press the small red remote button to scan that satellite. Confirm changes when prompted.
7. When scanning is done you will be returned to the Dish Settings menu and you can repeat steps 5 and 6 for each additional sat you want to set up.
8. Now that you have setup and scanned your satellites, Press Exit and you will be taken to the main menu. Navigate down to Option and set the following:
Auto CH/TP Update -----> Set to ON
Renumbering Local CH -----> Press OK and navigate to your local then press OK and select. Now press Exit and confirm changes and continue to press Exit untill you get to the menu.
9. Now select Configuration and set your time zone and then navigate down to set Summer Time ON if applicable.
UPDATE GUIDE LISTINGS
Press EPG on the remote and press the small Yellow button on the remote and leave it like that for about 10-15 minutes.
Always make sure back switch is OFF before connecting or disconnecting and wires to the receiver.
USING IKS
1. When an ECM occurs, go into Menu and select Option and navigate to Auto Roll and set to OFF.
2. Then navigate down to Mode and set to Network. Then press Exit and confirm changes when prompted.
3. Go to Menu/Configuration/Network settings and set the Connection Mode to DHCP.
4. Now turn the back switch OFF then ON for settings to take effect.
Attaching K-Hub
1. With receiver OFF at back switch, connect the serial cable from the Hub to the Kbox.
2. Plug in your internet cable to the Hub.
3. Plug the power adapter to the Hub.
4. Turn rear switch back to ON.

__________________


Testing: Sonicview 4000, Viewsat Xtreme,
Ultra, Lite, Nfusion Nova, Captiveworks 800,
Nfusion Nuvenio HD,Sonicview 360 Elite(Ihub),
Conaxsat Duo(&hub), Limesat Ultra

Life is too short to wake up with regrets.So love the people who treat you right.Love the ones who do not,just because you can.Believe everything happens for a reason.If you get a second chance,grab it with both hands.If it changes your life,let it.Kiss slowly.Forgive quickly.God never said life would be easy.He just promised it would be worth it.

You do not have to be crazy to be my friend, but it sure helps.................