Satellite Setup

Go to the Installation Option, enter “0000” for password
Go to the Antenna setup Option,
Select satellite you want (birds Echo8.6/Ku at 110W and Echo7/Ku at 119W are the Dish birds), press the OK button. DO NOT select more then one satellite if you only have one satellite.
LNB Type: select “Standard”
LNB Local-Freq: enter “11250”
22kHz: OFF
See above note: DiSeqC: 0, If you have two lnbs on the Dish or two Dishes then change it to the correct lnb #1, #2, so on...
Skew: 45
TP: Leave it as is
Check the Level= highest as you can, and Quality= highest as you can (adjust the D!ish slightly to improve the signal strength)
If you get no quality level on these transponders, try others before giving up. Not all transponders are transmitting all the time. MAKE SURE THE CABLE IS PLUGGED INTO THE "IF INPUT" PORT ON THE BACK OF THE RECEIVER! Plug the other end directly into the LNB on your Dish.
Readjust your Dish if you still not getting any quality signal.
Press the Exit button, press OK to save setting.