After researching all the possible fixes and none working loading manual force

using a cable manual load ,,,,,usb thumb drive....

none working i checked voltage and found that when dsplaying 8888 is because of a interruption in power when loading a file ......

this can be duplicated with any sv 4000 now with 2 units displaying 8888 on the display we needed a fix none of the posted fixes were doing anything to remedy this issue but after taking the cover off and unplugging the main board and turning the unit on from back power button for a count of 5 then turning off then plugging main board back in and turning unit back on from back button the 4000 fired right up and worked great i then loaded a factory file with usb drive and wala all's good again now to see if this was a fluke or a fix i repeated the whole process again on unit number 2 boda bing boda bang wala fixed and working great so this to me is a great way to revive i have now also fixed one that had been stuck on boot also

__________________


Please don't PM me with fta related questions, they will no longer be answered.

Hello, Pro

I have a Premier that is stuck in the 8888 mode

I tiried this fix several times but no go...

__________________

here's what it took to fix this error of 8888's

it took me 23 times before it would take!

but now I get No quality or signal,,,,,my other boxes are working great Q95
not sure on what next, but i;m gonna keep trying a few more things.


If your SV-360 Premier seems to be locked up or frozen and you are getting weird characters or numbers on the front display such as "8888" then this guide is for you.

Place the SV360 Premier_SysCleanFile on a USB drive.

1] Place File on your USB stick.
2] Place USB stick in Front or Back of the Receiver.
3] Power receiver ON while holding the OK Button on the Front Panel.
4] Now use front Panel controls and Select the Clean File (SV360 Premier_SysCleanFile)
5] And Press OK button to load.
6] Now your Done....SHEs alive and well.
7] Do a Hard reboot (power OFF-ON)
8] Then Load the latest update bin file.
9] You'll be set and watching TV.


This will resolve any Lock up problem and most other problems with the Sonicview SV-360 Premier.

__________________

Hi Putski not sure if you noticed but this only works with SV 4000,for SV Premier guide and file is posted here >>> Sonicview SV-360 Premier - If Receiver Is Locked Up - "8888" Error

__________________


Please don't PM me with fta related questions, they will no longer be answered.