First of all, at this time I would not recommend trying the beta 220 file for the iHub with your Premier....it will not load properly....look at the other threads about it to see what has been tried.....but if you want to give it a whirl...feel free.

If you do, and it locks up your receiver (I bet it does) don't worry too much about it..it is a relatively easy fix...you may have to try the fix for it a couple of times, but I promise...it works...I have done it probably 12 times....I keep trying different things to see if I can get the file to load....(no luck yet)

Here is what to do if you are locked up..

If you are using component cables (red,green,blue) to connect to the tv, you need to connect the receiver with regular RCA cables, a coax cable, or an S-video cable. With the component cables you will not be able to see the USB loader that you are going to be opening. You can reconnect the component cables after you complete the steps below.

Reformat a USB stick

1)turn of the receiver with the switch in back
2)Load the last working file (175) to a usb stick and plug it into the usb port on the receiver
3)Press and hold the OK button (the silver one on the front of the receiver) and turn the receiver back on with the back switch. You should see USBL come up on the display of the receiver.
4) If the only file you have on the USB stick is the 175 file, you should see it on the TV screen. Press the OK button on the receiver and release it. It will count down....wait for it.
5)When it finishes, turn the receiver OFF with the back switch and remove the USB stick.
6) Turn the receiver back ON with the switch in back....you should be good to go.

__________________

• Want to know when the new FTA Fix files are posted?
• General Helpful Hints on Forum Posting