Still no joy. S# has been validated by another person. I have setup the Dish settings exactly as instructed. I receive a few channels "open" as they are called. The ihub is connected to the server but does not seem to be exchanging IKS.

I am still trying to get my ihub to work properly with my system. Since I have verified I am connected to the server I am now questioning the software I loaded onto the receiver. I have only one file loaded onto the reciever: SV360Premier_iHub_v245_BETA_ju ly9.rom

Is this the correct file? Again my receiver is brand new and once I configured the ihub to v1.4 I loaded the above file onto the receiver. No other files were loaded on the receiver.

Thanks for your help!

List every line in ipconfig you have.Just post the settings on the right side so we can see what you got.Then change USE DNS YES to NO and see if you have zero's under NO.If so enter 77.93.75.89 then click OK then scroll down and click apply.Yes the 245 file is the one.Let us know.

__________________

Here are my settings:

Setting Type: DHCP
Use DNS: Yes
Domain Name: SVFTAIKS.COM
DNS IP: 66.182.66.65
Server Port: 1920
Serial #: Has been inputted correctly

Yes changing use DNS to "No" reveals that my server IP is indeed 77.93.75.89, so I believe I am connected to the server.

I can receive several "open" channels but the majority of the channels are not available "No Service or Scrammbled"

Thanks for the help

you have the 245 file loaded as the only file .you also need the last fta fix file. here it is .click here>>> Sonicview 360 Elite Dongle [ihub] Fix July.11.2009. is your router showing port connections,all lights on where you are plugged into?if not you might have to re-set your router.but that does not sound like the problem. in your wiznet there are settings. could you write those down and post them please ? your numbers under dns should read 77.93.75.89 when no is present in ipconfig as you posted. keep the faith,you'll get it.

__________________

My WIZnet Settings are as follows:

IP Configuration DHCP
Server IP 77.93.75.89
Port 1920
OPeration Mode Mixed
USE DNS is checked
DNS Server 66.182.66.65
Domain Name: SVFTAIKS.COM

My Router is functioning properly all ports and IPs are listed. Green and amber lights are present.

At times, if I stay on a channel for a period of time, it comes through, but when I try to change the channel nothing comes through. If I go back to the channel that was working previously, nothing is there.

As for the FTA fix on my Sonicview Premier, I have loaded the SV360Premier_iHub_v245_BETA_ju ly9.rom, are saying I need to load the elite V209 file date July 9?

Yeah I reset my router and modem one time and then I was screwed, had to bring it all down to the phone company so that they could reconfig it all,
cost me 40 bucks

__________________

Well I have tried testing other areas that might be causing my inability to get my ihub working properly, but its still dead. From the information I provided previously anyone have any ideas? Do my settings look right?

these settings where are they from? are they from ur tv screen in I.P. Config?


or are them settings from ur Wiznet?

i see a cpl things wrong

__________________

yep. it sounds as if your wiznet settings are not correct.they need too be the same as your ipconfig in your receiver. get back to us and we will walk you thru .

__________________