ive been trying to connect with the ihub for 4 days now is the server down i heard rumours of a ip change

It is freezing but you should be able to connect to SV server. Try this

Load the latest iks file, Premium v240.
Scan sats you are interested in.
Plug dongle into serial port of receiver
Plug ethernet cable from router to dongle
Go into installation IP Config and enter:
Setting Type: Static
Local ip: 192.168.1.101
Local Port: 1920
Subnet: 255.255.255.0
Gateway: 192.168.1.1
Use Dns: Yes
Server IP: svftaiks.com
Dns Ip: 208.67.222.222
server port: 1920
serial Number from Dongle
Apply

__________________


Please don't PM me with fta related questions, they will no longer be answered.

I did exactually as you described and realized my computer was no longer on the internet..when i unplugged the tv from router i got internet back so i went to change ip config and every time i hit menu the #@* thing rebooted even after a hard reboot please help!!Should i start over from scratch/factory files-fix rescan sats or whats going on maybe corrupt fix install??

bobon911 receiver reboots everytime you hit your menu on remote is what you are saying, correct? If so, you may have to load the receiver from your computer with latest factory file and then setup your ihub. Make sure you follow all set up instructions. Have any other problems let us know

__________________


Testing: Sonicview 4000, Viewsat Xtreme,
Ultra, Lite, Nfusion Nova, Captiveworks 800,
Nfusion Nuvenio HD,Sonicview 360 Elite(Ihub),
Conaxsat Duo(&hub), Limesat Ultra

Life is too short to wake up with regrets.So love the people who treat you right.Love the ones who do not,just because you can.Believe everything happens for a reason.If you get a second chance,grab it with both hands.If it changes your life,let it.Kiss slowly.Forgive quickly.God never said life would be easy.He just promised it would be worth it.

You do not have to be crazy to be my friend, but it sure helps.................

Ok i have started over from scratch and im pretty sure everything is setup right but still no tv?? HELP!!

bobon911 you did all the below? Make sure you hit apply at the end also. Make sure all setting match. Is your receiver brand new? Is your ihub light on?
Do you have the www out of the server IP? Check all settings below with your setting and let us know
Load the latest iks file, Premium v240.
Scan sats you are interested in.
Plug dongle into serial port of receiver
Plug ethernet cable from router to dongle
Go into installation IP Config and enter:
Setting Type: Static
Local ip: 192.168.1.101
Local Port: 1920
Subnet: 255.255.255.0
Gateway: 192.168.1.1
Use Dns: Yes
Server IP: svftaiks.com
Dns Ip: 208.67.222.222
server port: 1920
serial Number from Dongle
Apply

__________________


Testing: Sonicview 4000, Viewsat Xtreme,
Ultra, Lite, Nfusion Nova, Captiveworks 800,
Nfusion Nuvenio HD,Sonicview 360 Elite(Ihub),
Conaxsat Duo(&hub), Limesat Ultra

Life is too short to wake up with regrets.So love the people who treat you right.Love the ones who do not,just because you can.Believe everything happens for a reason.If you get a second chance,grab it with both hands.If it changes your life,let it.Kiss slowly.Forgive quickly.God never said life would be easy.He just promised it would be worth it.

You do not have to be crazy to be my friend, but it sure helps.................

still no tv my router recently went out and i replaced it with the same exact kind could this have anything to do with it im at a loss ive tried everything toget this ihub to work it was working fine before .could my ihub go bad or is there a way to check it is being seen by the router and the lights are on on the ihub

For those of you that are new to the IHUB let me give you a couple hints that seem to work really good.
1) before you load a new beta file i suggest you shut of you reciever from the back and remove your ihub.Load the new file then reboot and reconnect your IHUB.
This seems to stop the problem of "i loaded the new file and now it doesnt work".
2)in your user options change use priority to IHUB (or iks ).this seems to cutt down on the freezing.
3)after loading new files and reconnecting your IHUB let it sit on channel 100 for a cpl minutes.Then when you change to another working channel you wont have to wait as long for the channel to come in.
4) if for some reason you are getting scrambled channel on a working channel go to IPconfig and change dns to no if the line below that says 0.0.0.0 it means one of 2 things.it means either the server is down OR it means that you need to reboot your network.
If you are like me and you are running more then a couple things off your router i would suggest trying the router rebooting first.the more things you have running off your router the more often you need to refresh your network.
5)This is mainly for the new IHUB users.the first time you connect your IHUB, if after a few minutes you still get scrambled channel i suggest you reboot your network,9 times outta 10 that is the problem.
For those that dont know how to reboot your netwrok here are the steps.
1)turn off reciever from back and unplug both modem and router.
2)plug modem back in after about 10 seconds and allow it to fully reboot.
3)then plug router back in and allow it to fully reboot.
4) now turn on reciever.
And this last one seems kinda silly to mention but sometimes people forget.After loading all the files you need then make sure you have everything set up properly in your antenna settings(trust me this does happen).

__________________


Please don't PM me with fta related questions, they will no longer be answered.

wich software didi you use to load the ihub? the wiz1 get error (fail to upload)can you help me please?? thanks

This post originated over two years ago and this info is no longer any good.

Start over with some details about your box, lnb, type of dongle and the iks service you have signed up with.
Has this setup ever worked in the past ? What sats are you trying to get ?
Do you have pic and sound on channel 101 ??

We need details to help you.

Sp0iler

__________________