I have 2 recievers 1 sv 360 premiere and 1 cnx trio I have two dishes set up one with 110 and 119 and 1 with 91,what I was wondering is how can I run so I can run to both recievers I have numerous disqc switches and I also have a dp 34 switch.Both recievers are hooked to the same tv just wanted to have them both hooked up so all I have to do is turn one off and the other on if one goes down and the other dosent.

heres what you do, and I have seen the same set up, many times...

ok you run the 2 cables from 119 and 110 into ur dp34 switch 119 into port 1 and 110 into port 2 then take ur other wire from ur other sat with the Bev and run that cable to dp34 switch into port 3


then you just run 2 seperate cables from dp34 switch,, then one cable to one box and the other cable to ur 2nd box and when setup you know where all cables are and what ports...

__________________

Thanks for the reply,do you know if I can also hook my ota antenna up to the switch too.

Answered my own question just had to look at dp 34 switch and see it only has 3 inputs.

yes it has only 3 spots for the line to come in from lnb first spot sat 119 second spot 110 third spot 91 or what ever bev sat ur watching

then it has 4 spots for 4 receivers,,,then it has 3 more spots in case you add another dp 34 you can tie them together,,thats what the extra 3 are for.. look at this link>>> ULTIMATE_SWITCH_GUIDE_-_pictures_folder.zip


and look for picture number DP34-3x4-DP0072 and disregard the red lines and sw21 switches...and theirs ur set up...Enjoy

__________________